|
|
 |
|
|
| Ferrous Metals | Non-Ferrous Metals |
| No. |
Material Description |
ASTM Specification |
Grades |
| 1. |
Carbon steel(carbon less than 0.35%, tensile strength less then or equal to 70 ksi(480 Mpa)) |
| A27/A27M |
| A216/A216M |
| A352/A352M |
| A356/A356M |
| A732/A732M |
| A757/A757M | |
| All grades |
| WCA,WCB |
| LCB,LCA |
| 1 |
| 1A,2A |
| A1Q | |
| 2. |
Carbon steel(tensile strength greater than 70 ksi(480MPa)).Carbon - manganese steel(tensile strength equal to or greater than 70 ksi but less than 90 ksi(620MPa)). |
| A148/A148M |
| A216/A216M |
| A352/A352M |
| A732/A732M |
| A757/A757M | |
|
| 3. |
Carbon and carbon-manganese steel(tensile strength equal to or greater than 90ksi(620MPa)). |
A732/A732M |
3Q,,4A,4Q,5N |
| 4. |
Low-alloy steel(annealed,normalised and tempered.Tensile strength less than 85 ksi(585 Mpa)).
|
| A148/A148M |
| A217/A217M |
| A352/A352M |
| A356/A356M |
| A389/A389M |
| A487/A487M |
| A757/A757M | |
| 80-50 |
| WC1,WC4,WC5,WC6,WC9 |
| LC1,LC2,LC3,LC4 |
| 2,5,6,8 |
| C23,C24 |
| 11A,12A,16A |
| B2N,B3N,B4N | |
| 5. |
Low-alloy steel(annealed,normalised and tempered.Tensile strength greater than 85 ksi(585 Mpa)). |
| A148/A148M |
| A217/A217M |
| A356/A356M |
| A487/A487M |
| A732/A732M |
| A757/A757M | |
| 90-60,105-85 |
| C5,C12,C12A,WC11 |
| 9,10,12 |
| 1A,1C,2A,2C,4A,4C,6A,9A,9C,10A,13A |
| 6N,15A |
| D1N1,D1N2,D1N3,E2N1, E2N2,E2N3 | |
| 6. |
Low-alloy steel(quenched and tempered) |
|
A148/A148M
|
| A352/A352M |
A487/A487M
|
| A732/A732M |
| A757/A757M | |
90-60,105-85,115-95,130-115,135-125,
150-135,160-145,165-150,165-150L,
210-180,210-180L,260-210,260-210L |
| LC2-1,LC1,LC2,LC3,LC4,LC9 |
1B,1C,2B,2C,4B,4C,4D,4E,6B,7A,8B,8C,
9A,9B,9C,9D,9E,10B,11B,13B,14A |
| 7Q,8Q,9Q,10Q,11Q,12Q,13Q,14Q |
B2Q,B3Q,B4Q,C1Q,D1Q1,D1Q2,
D1Q3,E1Q,E2Q1,E2Q2,E2Q3 | |
| 7. |
Ferritic stainless steel |
A743/A743M |
CB-30,CC-50 |
| 8. |
Martensitic stainless steel |
| A217/A217M |
| A352/A352M |
| A356/A356M |
A487/A487M
|
A743/A743M
|
| A757/A757M | |
| CA-15 |
| CA6NM |
| CA6NM |
| CA15-A,CA15-B,CA15-C,CA15-D,CA15M-A,CA6NM-A,CA6NM-B |
| CA-15,CA-15M,CA6NM,CA-40,CA6N,CB6 |
| E3N | |
| 9. |
Unstabilised austenitic stainless steel(carbon greater than 0.03%) |
| A351/A351M |
| A447/A447M |
| A743/A743M |
| A744/A744M | |
| CE-8MN,CF-8,CF-8A,CF-8M,CF-10,CF-10M,CG-8M,CH-8,CH-10,CH-20,CG6MMN,CF10S1MNN,CE20N |
| Type I |
| CF-8,CG-12,CF-20,CF-8M,CF-16F,CF10SMNN,CH-20,CG-8M,CE-30,CG6MMN,CH-10,CF-16Fa |
| CF-8,CF-8M,CG-8M | |
| 10. |
Low-carbon austenitic stainless steel(carbon equal to or less than 0.03%) |
| A351/A351M |
| A743/A743M |
| A744/A744M | |
| CF-3,CF-3A,CF-3M,CF-3MA,CF-3MN,CK-3MCUN,CG3M,CN3MN |
| CF-3,CF-3M,CF3-MN,CK-3MCUN,CN-3M,CG3M,CN3MN |
| CF-3,CF-3M,CK-3MCUN,CG3M,CN3MN | |
| 11. |
Stabilised austenitic stainless steel |
| A351/A351M |
| A447/A447M |
| A743/A743M |
| A744/A744M | |
| CF-8C,CF-10MC,CK-20,HK-30,HK-40,HT-30,CN-7M,CT-15C |
| Type II |
| CF-8C,CN-7M,CN-7MS,CK-20 |
| CF-8C,CN-7M,CN-7MS | |
| 12. |
Duplex(austenitic-ferritic)stainless steel |
| A351/A351M |
| A872/A872M |
| A890/A890M |
| A995/A995M | |
| CD3MWCuN,CD-4MCu |
| J93183,J93550 |
| 1A,1B,2A,3A,4A,5A,6A |
| 1B,2A,3A,4A,5A,6A | |
| 13. |
Precipitation-hardened austenic stainless steel |
A747/A747M |
CB7Cu-1,CB7Cu-2 |
| 14. |
Nickel-base alloys |
|
| CW-12MW,CY-40 Class 1,CY-40 Class 2,CZ-100,M-35-1,M-35-2,N-12MV,N-7M,CW-6M,CW-2M,CW-6MC,CX-2MW,CU5MCUC |
| CW2M | | |
| We can also cast other than above grades as per customers specification meeting to any standards like EN, ASTM, GOST, JIS, IS etc | |
 | |
